How To Set Sony Alarm Clock Cube

Article ID : 00026516 / Last Modified : ten/26/2020

How to set the date and time on the clock radio.

IMPORTANT: This article applies merely to specific products and/or operating systems. Check Applicable Products and Categories for details.

Follow this procedure to ready the date and fourth dimension on the clock radio.

NOTE: Non all Clock Radios have the same settings options. To meet if your clock radio has this option, bank check the specifications or supplied operations guide. Manuals are posted on your model support page.

Plug in the clock radio into a working electric outlet.

For the ICF-CS10IP and ICF-CS10IPBLK, make sure that the Time ZONE settings are correct.

Printing and hold the - TIME ZONE button for at least two seconds until the area number ii flashes in the display.

Printing the Time Gear up +/- button repeatedly to select one of the post-obit:

NOTES:

Past default, the TIME ZONE setting is set to Eastern Standard Time (EST).

Although the clock radio is preset from the factory to default to the Eastern Standard Time (EST) zone, if the displayed time is incorrect or the clock did not alter for Daylight Savings Time, make sure to program the time zone for your area.

Area Number	Fourth dimension Zone
1	Atlantic Standard Time
2	Eastern Standard Time
iii	Central Standard Time
4	Mountain Standard Time
five	Pacific Standard Time
6	Yukon Standard Time
7	Hawaiian Standard Time

Printing the - TIME ZONE button to set.

Press and hold the CLOCK button until a beep sound is heard.
Printing the TUNE/TIME SET + or - button to select the correct twelvemonth.
Press the CLOCK push button.
Press the Tune/Time SET + or - button to select the right calendar month.
Press the CLOCK push button.
Press the Melody/TIME SET + or - button to select the correct day.
Printing the CLOCK button.
Printing the TUNE/Fourth dimension Set up + or - button to select the correct hour.
Press the CLOCK button.
Press the Tune/Fourth dimension SET + or - button to select the right minute.
Press the CLOCK button.

Follow this procedure to fix the ALARM of the clock radio.

For the ICF-C111:

On the pinnacle of the radio, press and agree down the ALARM push button.
While pressing the Alert button, press TIME Set up H push button.
When the desired hour is displayed on the LCD, release the ALARM button.
While pressing the ALARM push button, press TIME SET M push button.
When the desired minute is displayed on the LCD, release the Alarm button.
To enable the alert, motility the function selector switch to RADIO or BUZZER.

For the SRF-V1BT:

On meridian of the radio, printing and hold down SETTINGS button.
Turn Tune dial until Time is displayed.
Press ENTER.
With Time setting displayed, press ENTER once more.
Plough TUNE dial to select Hour (including AM or FM) and press ENTER.
Plow Melody punch to select Minutes and printing ENTER.
Printing SETTINGS push to exit menu.

For the ICF-CD873:

Press ALARM A for a few seconds until a beep is heard.
NOTE: and the hr flashes on the display.
Press Melody/Time SET + or - to set the hour.
Printing Alert A over again.
Echo steps 2 and 3 to set the minute.
NOTE: Two brusk beeps sound to ostend the setting. After a few seconds, the display returns to the current fourth dimension.

For the ICF-CS10IP and ICF-CS10IPBLK:

Press and hold Warning Set up A or B. WAKE Upwardly appears and the hour flashes in the display.
Press Fourth dimension Set + or - repeatedly until the desired 60 minutes appears. To cycle the hour apace, press and hold TIME SET + or -.
Printing Alarm SET A or B. The minute flashes.
Echo footstep ii to prepare the minute.
Press Warning SET A or B. The days of the week flash.
Echo step 2 to set the days of the week.
Notation: You lot can select the days from the post-obit three options:
- Every day: Monday TUE Wed THU Friday Sabbatum Sunday
- Week 24-hour interval: MON TUE Wednesday THU FRI
- Calendar week end: Sat SUN
Press ALARM Gear up A or B. The warning mode setting is entered.
Printing Time Fix + or - repeatedly until the desired alarm mode flashes.
Notation: Y'all tin can choose ane of 5 settings:
- iPod, FM1, FM2, AM or Buzzer.
- Set the alarm mode as follows:

For the ICF-CD820 and ICF-CD821:

While holding down Alert A, press either Fourth dimension SET/TRACK + or - until the desired time appears in the display window.
NOTE: The indication flashes and ":" lights.
Release ALARM A. The alarm fourth dimension is set and the indication becomes the electric current time.
While holding downward WAKE Upward Track, set the desired track by pressing or .
Release WAKE Up Track. The track is preset and the indication becomes the current fourth dimension.
Notation: When the CD role player is preset to beginning with track v, it volition always start with track 5 fifty-fifty if a unlike CD is used, unless the WAKE Up TRACK is inverse.

For the ICF-CD853V:

For the CD alert, the track specified as the wake-up rail is played first.

Annotation: If the CD play mode is fix to SHUFFLE or SHUFFLE REP, yet, all tracks are played in random social club.

With the warning turned on, accommodate the book to the level you require.
Press ALARM Gear up CD for a few seconds.
Note: ALARM, CD announced on the display. After one beep, Alarm and the hour will start to wink in the display.
Press Tune/Fourth dimension Set up + or - until the desired hr appears.
NOTE: To fix the hr chop-chop, hold down TUNE/Time Set + or -.
Press ALARM Fix CD and the minute will flash.
Echo pace three to fix the infinitesimal and press ALARM Ready CD.
Notation: The wake-upwardly rails number flashes on the display.
Press Melody/TIME Prepare + or - to select the desired wake-up runway number.
Notation: The wake-up track number can be prepare to 99.
Press ALARM Gear up CD and two short beeps volition confirm the setting.